Product Description Marine Airbag is also known as rubber airbag, ship launching airbag, ship salvage airbag,  ship lifting bag, boat airbag, inflatable airbag, ship roller, rubber balloon, air tube, made of natural rubber &multi layers of rubber dipped Nylon fabric(like tyre).   FLORESCENCE Brand is very famous in Asia, especially in Indonesia and Singapore, so we have Marine Airbags&fender store in Batam of Indonesia, and agent in Singapore. And we can come to your site to assist your project.
 Barge ship launching Rubber Airbag
  Advantages  Our Marine Salvage Airbag Advantages: 1.Dia1.5/1.8m airbag stock available,quick delivery.
2.Lifespan:can be re-used for 65-80 times,10 years  3.Guaranteed period:12 months  4.Certificates:CCS, BV,ISO etc. 5.Provide repair kits.
6.Material:natural rubber, rubber-dipped nylon cord fabric
7.Factory with 20 years' experience   How Does Our Rubber Airbag Work? All you need is a slipway that is free of sharp objects, a slipway winch together with Accessories like  steel wire rope & shackles to provide the pulling force needed, and some airbags. Then, deflated  airbags are inserted under the hull of the vessel and inflated to lift the vessel. The airbags are designed  with great bearing capacity & facilitates the vessel into the water (or out of the water, depending on use)  due to its ability to roll.   Why should you consider using our airbags Do you spend a lot of capital in increasing your shipbuilding or ship repair capacity without knowing  that Rubber Airbags can do the same with more versatility & lower costs? Conventionally, building  Dry Docks, Cradles & Rollers are extremely expensive & time consuming. What's worse? The amount of ship repairing businesses you can take, is limited to the number and dimension of docks you have.  However, businesses today should be agile and should possess highly versatile equipments to adapt  to the ever-changing economy.     Structure 1 Ship launching rubber airbag Structure: Ship Airbags‘ basic body are consisted of our rubber layers, synthetic-cord-reinforced rubber layers, are kind of a cylindrical airbags with hemispherical heads at the both ends. All of these are vulcanized together, and then inflate air inside to enable it to roll or float.  
      Q&A 2 Q&A: 1.Questions: I have a ship need to do launching and landing, I want to use ship airbags, but how can I choose  the airbag size and what other equipments needed.  answer: We will give you the professional solution for ship launching. Pls let me know the ship size and weight, we can suggest the best size for you based on the budget . Besides the airbags, we can provide any equipments that are need druring the ship launching or salvage, including rope or rope net,  winch, rubber tube and air compressor machine, etc.   2. Q: How can the rubber airbags can load thousands tons ships when launching.  A:Our airbags are made by 54% natural rubber and use special synthetic-tire-cord layer(tire) material. It is high kneading and compressing resistance, extend its lifespan to 10years. The heavier the ship, the       more airbags needed.
  3. Q: How to use marine airbags to salvage ship:       what equipments are needed to install / securing / inflate the air bags(for salvage)?  A: You will need diver to go under the water(install); and tie our deflated airbags with rope or net to   the bottom of your ship(securing);then inflate the airbag with air compression machine linked by    rubber hose on the land(inflate ).   4. Q:What is your product warranty.  A: We can give 3 years product warranty.   5. Q: How to check the shipping cost?   A: The shipping cost is determined by the destination port, weight, packing size, total CBM of goods.         Specifications   3 Marine airbags Standard specifications:

Diameter (D):	From 0.8m to 2.4m
Effective Length (EL):	From 6.0m to 20.0m
Total Length (TL):	From 7.0m to 21.5m
Standard Number of Layers:	Usually 4-10 layers
Loading Capacity:	About 10-40 T/M

  4 Marine Airbag guaranteed working pressure:

Type	D=0.8m	D=1.0m	D=1.2m	D=1.5m	D=1.8m	D=2.0m
3 layers	0.13MPA	0.10MPA	0.09MPA	0.07MPA	0.06MPA	0.05MPA
4 layers	0.17MPA	0.13MPA	0.11MPA	0.09MPA	0.08MPA	0.07MPA
5 layers	0.21MPA	0.17MPA	0.14MPA	0.11MPA	0.09MPA	0.08MPA
6 layers	0.25MPA	0.20MPA	0.17MPA	0.13MPA	0.11MPA	0.10MPA
7 layers	0.29MPA	0.23MPA	0.20MPA	0.15MPA	0.13MPA	0.12MPA
8 layers	0.33MPA	0.26MPA	0.23MPA	0.17MPA	0.15MPA	0.14MPA

      Applications 5 Applications of the Florescence marine airbag: 1. Airbag for ship upgrading, conversion or new/repair launching (Ship launching airbags) 2. Airbag for hoisting and transporting heavy goods up to 10,000 tonnes structure 3. Marine pneumatic rubber fender for protective purposes 4. Marine airbag for salvaging sunken ship or heavy immersed steel structure weighing up to few thousand tonnes 5. Pneumatic rubber core for architecture engineering 6. Container for storing and transporting gas, corrosive chemical liquid and pure water
7. Rubber bag for ship ballast 8. Airbag for construction and floating of bridge or pipeline    
 For marine airbags,   Pneumatic rubber airbag , Ship Launching Airbag, inflatable rubber airbag balloon, pls contact us. If you have any questions or need any help, pls contact me freely, we will reply you within 24 hours----Michelle  (email: michelle at florescence.cc)

Contact us if you need more details on marine airbag. We are ready to answer your questions on packaging, logistics, certification or any other aspects about marine salvage airbag、marine airbag exported to dubai. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Marine Airbag > Ship Launching Airbag