How to remove the socket panel?
First, how to remove the socket panel? When the socket is disassembled, first turn off the relevant electric Switch to ensure that the circuit is not dangerous.
2. Then use a flat-blade screwdriver to remove the switch cover from the wall fixed to the junction box, remove the screws, and place the cover and the probe of the circuit tester on the screw terminals on each switch to ensure that there is no power. Go to the switch.
3. Switch the junction box with a Phillips head screwdriver to remove the two screws, the wire drawing switch, from the junction box, so that you can access the wire terminal screw on the side of the switch.
4. The switch on the upper side, a Phillips screwdriver to loosen the terminal screw, pull the wire away from the switch, and pull the switch off the wall.
5. Plastic wire caps At each wire end, electrical tape is wrapped around each cap and wire to further secure the wire tail cap, and the east-west wire enters the junction box. A solid cover is placed in the junction box with fixing screws. Open the circuit breaker of the room's outlet.
As long as you master these five steps, there is no problem with the ordinary wall switch socket removal. Of course, if your home wall switch socket is special, please find a professional electrician to disassemble and install.
Product Categories : Wall Switch Panel