Basic Info
Model No.: FL-JZY 1294 D2.5*L5.5m
Product Description
Marine
Rubber Fender 1.The advantages of
Pneumatic Rubber Fender 1.1 Choose reinforce synthetic-tire-cord layers 1.2 No mold vulcanization and attach surrounding molding process 1.3 High energy absorption and low reaction force 1.4 Good adaptability to tilt in contact 1.5 Floating on the surface of the water, ship swaying can apply 2.Structure characteristics of the pneumatic rubber fender Pneumatic Rubber Fenders are made of an outer rubber, reinforcement synthetic-tyre-cord layer, and inner rubber, vulcanized firmly. A]. the outer rubbers are used to protect the cord layers and inner rubber from abrasion and other external forces. This rubber compound have sufficient tensile and tear resistance strength to withstand anticipated weather conditions and severe usage. B]. the reinforcement synthetic-tyre-cord layer strong enough to maintain the internal air pressure of the fender. C]. the inner rubber layer seals the pressurized air inside the fender. D]. fenders of diameter 2500mm and larger equipped with safety valve for releasing excess internal pressure when the fenders are over-compressed accidentally. Fender assembly for the end of metal, by inside and outside the two flanges with bolts, nut clamping, center is a valve, its structure is similar to automobile tire valve. 3. The purpose of the pneumatic rubber fender 3.1 Ship to ship berthing Accompanied by a large ship, the risk of two ship berthing at sea is also increased, especially when the weather changes with wind and waves. Adopting pneumatic fender as the buffer can not only makes heavy berthing easy, but also improves the efficiency of the transportation operations. Pneumatic fender is mainly used for Ice in the Antarctic ocean fishing ships and large oil tanker berthing. 3.2 Used for terminal dock protection Because of the large size of the ship, the berthing impact energy has multiplied.Inflatable rubber fender are widely used because of its high energy absorption and low reaction force features. 4. Maintenance and safety knowledge 4.1 Internal pressure adjustment Fender pressure should be kept in the standard air pressure in the± 5% range, and once every three months to check air pressure, deflated or fill gas up to standard in a timely manner. 4.2 safety knowledge a. Avoid touching the sharp things b. when Long time not use, should wash to dry, filled with right amount of compressed air, placed in a cool dry ventilated place. c. Storage place away from heat, acid and alkali, oil and grease 5. Pneumatic rubber fender use matters needing attention a. Pneumatic pressure control in±5% of the rated pressure b. Test pressure normally, add pressure in a timely manner c. Avoid contact with sharp objects d. when Long time not need, should wash to dry, filled with right amount of compressed air, placed in a cool dry ventilated place. e. Storage place away from heat, acid and alkali, oil and grease f. when store, shall not be folded and piled up 6. Fender technical data sheet
Size | Initial Internal Pressure 0.05MPa | Weight ±10% | Initial Internal Pressure 0.08MPa | Weight ±10% |
D*L(mm) | R(KN) | GEA(KJ) | Kg | R(KN) | GEA(KJ) | Kg |
500*1000 | 64 | 6 | 25 | 83 | 8 | 25 |
600*1000 | 74 | 8 | 32 | 96 | 11 | 32 |
700*1500 | 137 | 17 | 50 | 178 | 24 | 50 |
1000*1500 | 182 | 32 | 80 | 235 | 44 | 80 |
1000*2000 | 257 | 45 | 100 | 335 | 63 | 125 |
1200*2000 | 297 | 63 | 120 | 386 | 86 | 165 |
1350*2500 | 427 | 102 | 165 | 554 | 140 | 226 |
1500*3000 | 597 | 153 | 315 | 751 | 211 | 370 |
1700*3000 | 639 | 191 | 405 | 830 | 263 | 436 |
2000*3500 | 875 | 308 | 590 | 1138 | 424 | 632 |
2500*4000 | 1381 | 663 | 1050 | 1815 | 925 | 1110 |
2500*5500 | 2019 | 943 | 1333 | 2653 | 1317 | 1410 |
3000*5000 | 2104 | 1210 | 1880 | 2709 | 1571 | 2155 |
3000*6000 | 2583 | 1485 | 2160 | 3292 | 1888 | 2470 |
3300*4500 | 1884 | 1175 | 2020 | 2476 | 1640 | 2300 |
3300*6500 | 3015 | 1814 | 2700 | 3961 | 2532 | 3080 |
Contact us if you need more details on floating boat mooring fender. We are ready to answer your questions on packaging, logistics, certification or any other aspects about boat mooring fender、rubber fender. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Pneumatic Rubber Fender