Basic Info
Model No.: FL-JZY880 D2.0*L3.5m
Product Description
1.Pneumatic Rubber Fenders Introduction: Pneumatic Fender utilizes compressed air as cushion medium to take in the impact energy of ship. It features favorable flexibility, powerful energy absorption,portability (lightweight) and so on,and its angular compression performance is not liable to degrade.Thus, it is widely used to help ships lighter or moor in open sea or wharf with poor berthing conditions.
2.Application for Pneumatic Rubber Fenders:
Aircraft pneumatic rubber fenders has widespread application as following:
ship to ship,ship to wharf,
oil tankers, container vessels
luxury yachts, ocean platforms
larges shipyards
Fender system
military ports ,warship
larger under water foundations of bridges, etc.
3.Advantages of Pneumatic Rubber Fenders: 1.ISO17357/BV/CCS Certificate 2.Guaranteed energy absorption 3.Low hull pressures 4.
Chain tyre net and sling type 5.Thick skin construction 6.Good angular performance 4.Technical parameters of Pneumatic Rubber Fenders:
5.Pneumatic Rubber Fenders for Medium and Small Vessels
Vessel Tonnage | Size (D*L) mm | Recommend Vessel |
50 | 500*1000 | Fishing Vessel |
100 | 700*1500~1000*1500 | Fishing Vessel |
200 | 1000*1500~1200*2000 | Fishing Vessel, Tugboat |
300-500 | 1200*2000~1500*2500 | Fishing Vessel, Tugboat |
1000 | 1500*2500~1500*3000 | Tugboat, Transport Ship |
3000 | 2000*3000~2000*3500 | Ocean Trawler, Transport Ship |
10000 | 2000*3500~2500*4000 | Transport Ship |
6.Containers Arrangement 6.1 Normal Containers: We can calculate how many pieces could be loaded in each container, and do our best to save freight cost for our customers. 6.2 Flat Racks: These will be used for the fenders with bigger sizes, such as 3300mm(D)*6500mm(L). 6.3 Sometimes FLORESCENCE ships pneumatic fenders in a deflated state to help customers save freight costs and our staff will then guide them in the inflation process as follow:
7.Pneumatic Rubber Fenders Fenders Installation
Pneumatic Fenders Installation - Ship to Ship & Ship to Shore applications |
| Ship to Ship applications
After selection of the correct size fender suitable for the combined energy of the two vessels, the fenders should be equally spaced along the length of the smallest vessel. At each end it is recommended that a smaller secondary fender is installed to protect against rolling due to swell and wind during transfer operations. The fenders can be slung individually from mooring points along the deck or all linked together in a line fastened only at each end of the vessel.
| | Ship to Shore applications
For installation in tidal locations it is recommended that the fender is mounted to the quay at the midpoint of high and low tide, this allows the fender to rise and fall on tides with the least amount of slack in the moorings. Alternatively the fenders can be slung from mooring points along the top of the quay including mooring rings, mooring bollards or specially installed brackets. If the fenders are installed on a dolphin then the mooring lines can be installed along the side walls of the dolphin moving them well clear of the berthing surface. It is important to note that the fender will significantly change shape under full compression so a sufficient flat surface clear of protrusions is required for installation. It is not recommended to install pneumatic fenders onto mono-pile structures. |
     8.After Sale Service Normally we have 12+1 months warranty after delivery,if have quality problems during this time , we will supply free maintenance service. 9.Certifications    Contact us if you need more details on boat Dock Bumpers. We are ready to answer your questions on packaging, logistics, certification or any other aspects about floating jetty Rubber Fender、rubber fender. If these products fail to match your need, please contact us and we would like to provide relevant information. Product Categories : Pneumatic Rubber Fender
|
2.Application for Pneumatic Rubber Fenders:
3.Advantages of Pneumatic Rubber Fenders: 1.ISO17357/BV/CCS Certificate 2.Guaranteed energy absorption 3.Low hull pressures 4.Chain tyre net and sling type 5.Thick skin construction 6.Good angular performance 4.Technical parameters of Pneumatic Rubber Fenders: 
5.Pneumatic Rubber Fenders for Medium and Small Vessels 
7.Pneumatic Rubber Fenders Fenders Installation 
8.After Sale Service Normally we have 12+1 months warranty after delivery,if have quality problems during this time , we will supply free maintenance service. 9.Certifications 
Contact us if you need more details on boat Dock Bumpers. We are ready to answer your questions on packaging, logistics, certification or any other aspects about floating jetty Rubber Fender、rubber fender. If these products fail to match your need, please contact us and we would like to provide relevant information. 
