Product Description Salvage Airbag Rubber Airbag Rubber airbags are also called natural rubber airbags are commonly used for salvage engineering and floating operation. They are the best choice for 100-2000 tons buoyancy needs. Florescence airbags have the advantages as below:
1. Special synthetic tire-cord layer material
Our "Ship salvage airbags" are made with special synthetic tire-cord layers, which have much better performance than those made with PVC coated fabrics.
2. High-Pressure Design
Salvage airbags have a maximum working pressure of 0.25 Mpa. That means they can be used under 25m water-depth.
3. Holistic Screw Type Salvage Airbags
Our "Marine Salvage Airbags" are a totally enclosed tube with cone ends. It is manufactured using Holistic Screw technology. This design ensures that there aren't any welded seams. This makes them stronger than RF welded salvage airbags.
4. Equipped with Accessories
Our Salvage lifting bags are equipped with rubber handles, Nylon rope net and pulling rings.
Structure Structure of Rubber AirbagPlease see the picture 1 of " FLORESCENCE" rubber airbag structure. It is composed by airbag body and terminal iron part. The airbag body is composed by natural rubber and strength fiber material through vulcanization processing; The terminal iron part is made of cast iron, it is combined closely with the bag body; One end is for pulling when move the airbag, and the other end is for charging and discharging the air. All the fittings in picture 2 and 3 will be supplied with airbags for free. 

                           1 Terminal iron
                           2 Cylindrical airbag body
                           3 Cone airbag body
                           D Diameter of airbag
                           L Valid length of airbag
                           Loa Total length of aiirbag
Advantages How to salavge ship?
What equipments are needed to install /secure / inflate the air bags(for salvage)?
You will need diver to go under the water(install); and tie our deflated airbags with rope or net to the bottom or sides of your ship(secure); then inflate the airbag with air compressor machine linked by rubber hose on the land(inflate).
Besides the airbags, we can provide any equipments that are need during the ship launching or salvage, including rope or rope net, winch, rubber tube and air compressor machine, etc.
Operating notes we should know:
1. Generally the lifting speed is controlled at 1 meter per minute. People should control the lifting speed to ensure that airbags have enough time to vent expanding air by over-pressure valves.
2. Binding method is very important for the success of salvage, please send us the site conditions, we will give our best advice.
3. Working depth for the airbags is usually less than 25m. If more than 25m, we can use the airbags? and ropes lift ship to the working depth.
How to store rubber airbags? 1.The airbags should be maintained in a dry ventilated room and be protected from light.
2.The airbags should be in a relaxed condition free from tension, compression or other deformation.
3.The airbags should be kept away from any heat source.
4.The airbags should be protected from acids, alkalis, oils or organic solvents.
Specifications  Specification of rubber airbags as below:
Our service

1	We provide custom-made services
2	Professional supplier with over 20 year's experience
3	One-stop services
4	Take care of your packing and shipping requests

Any interest or need, pls contact me freely,we will reply you within 24 hours.
Claire Su
Email: info75 at florescence.cc
Tel/ Whatsapp/ Skype: +86 18205321973

Contact us if you need more details on rubber airbag. We are ready to answer your questions on packaging, logistics, certification or any other aspects about marine rubber airbag、rubber airbag for ship launching. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Marine Airbag > Marine Salvage Airbag