Product Description
Specifications easy floating pontoon
1 Dia1.2/1.5/1.8m stock avaliable
2 can use 10 years
3 20 years' experience
5 provide repair kits
Qingdao Florescence Rubber Product Co.,Ttd Florescence Ship Salvage Inflatable Rubber pontoon
1.)what equipments are needed to install / securing / inflate the air bags(for salvage)?
You will need diver to go under the water(install); and tie our deflated airbags with rope or net to the bottom of ship(securing); then inflate the
Airbag with air compression machinelinked by rubber hose on the land(inflate ). 2.)what is our warranty? We cans assure that we can lift any ships as you wanted, as long as we get enough proper information of the project. Besides the airbags, we can design suitable solution for your projects and provide any equipments that are needdruring the salvage, including rope or rope net, rubber pipe and air compression machine, etc
In some big vessel salvage works, salvage marine airbags are often used to offer buoyancy to make up the shortage of lifting capacity from barge crane. Salvage airbags can be attached to shipboard or stuff into cabins to offer buoyancy assistance. People should control the lifting speed to allow airbags have enough time to vent expanding air by over-pr essure valves. Generally the lifting speed is controlled at 1 meter per minute. In some caisson launch projects salvage airbags have been proved to be very helpful. In the past when the water level at launch way end is not deep enough people will have to build caisson for the second time after the caisson bases are lau- nched. With marine salvage airbags people can add extra buoyancy to the launched caisson to ensure its safe floating. Advantages of Florescence marine salvage pontoon/airbags : 1 High strength 2 Wear resistance and anti-aging 3 Good air tightness 4 Safety and reliability 5 High kneading & compressing resistance and damping capacity 6 Design different sizes according to client's request
7 Good raw material-cord fabric makes us win warm praise from clients 8 Produce according to:ISO 17357 Products structure: Marine salvageairbags, basic body are consisted of our rubber layers,synthetic-cord reinforced rubber layers, are kind of a cylindrical airbags with hemispherical heads at the both ends. All of these are vulcanized together, and then compress air inside to enable it to roll. 1. Outer Rubber The outer rubber layer protects the cord layers from abrasion and other external forces. This compound has sufficient tensile and tear strength to withstand any weather condition and hard usage. Standard color is black. 2. Synthetic-net-cord layer for reinforcement The reinforcement cord layers, which are made of Synthetictire-cord commonly used in tires, are arranged at ideal angles to hold the internal pressure and to distribute the stress evenly providing strong efficient reinforcement. 3. End Fittings End fittings include air tightness swivel and airbags safety air inlet. Application: 1.ship launching, lifting and refloating 2.floating bridge and dock construction 3.rescue and remove of wrecked ship 4. can be used as pontoons for supporting docks and other floating structure Standard specifications:
Diameter (D): | From 0.8m to 2.5m |
Effective Length (EL): | From 5.0m to 20.0m |
Total Length (TL): | From 6.0m to 21.5m |
Standard Number of Layers: | Usually 3-10 layers |
Loading Capacity: | About 10-40 T/M |
Contact us if you need more details on easy floating pontoon. We are ready to answer your questions on packaging, logistics, certification or any other aspects about marine salvage airbags、floating rubber pontoon. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Marine Airbag > Marine Salvage Airbag