Easy for installation marine rubber Dredging Hose
Description:
The discharge hoses are used with dredgers for silt/gravels conveyance.
The hose is often in connection with steel pipes or HDPE pipes. The suitable conveyance matters are usually mud, clay, fine sand, fine-mid sand and so on.
These hoses can be equipped with all the different types of flanges. They are available in any size and the maximum burst pressure can up to 7.5Mpa.
Liner thickness specified applies to the inside of the hose as well as the flanges. Tricolour indicators are optionally available.
Features:
1. Working temperature: -20℃to +50℃
2. Convenient to install
3. Flexible and safe to use
4. Excellent abrasion-resistant and bending resistant
5. Prevent ageing performance
Specification:
ID | Working Pressure (Mpa) | Burst ressure (Mpa) | Length (m) | Pipe Wall Thickness (mm) | |
mm | T(mm) | ||||
300 | ±2 | 0.4-1.2 | 3.6 | 1-3 | 34-37 |
414 | ±2 | 0.4-1.2 | 3.6 | 1-3 | 35-37 |
560 | ±3 | 0.4-1.2 | 3.6 | 2-3 | 40-45 |
600 | ±3 | 0.4-1.2 | 3.6 | 2-3 | 40-45 |
700 | ±3 | 0.8-1.5 | 4.5 | 2-3 | 40-45 |
800 | ±4 | 1.2-2.5 | 5.5 | 2-3 | 50-52 |
900 | ±4 | 1.5-2.5 | 7.5 | 2-3 | 55-58 |
1000 | ±5 | 2.0-2.5 | 7.5 | 3-5 | 75 |
Structure:
1. Inner rubber liner: composed of wear-proof natural rubber and synthetic rubber
2. Reinforcement layer: composed of high strength rubber dipped chemical fiber and reinforced by spiral metal wire.
3. Cover: composed of natural rubber and synthetic rubber.
4. Surface: takes the shape of corrugated
Please consult the salesperson in advance for sample details and prices, if you need it.
Product Categories : Dredging Hose > Discharge Hose