Unit Price: | 500~800 USD |
---|---|
Min. Order: | 1 Piece/Pieces |
Discharge Hose For Dredging
Discharge Hose include steel Flange discharge hose and rubber flange discharge hose.And wear resistant of discharge hoses, suitable for dredging slurry and sand, and the suitable working condition is from -20°to 50°.
It's convenient to install and flexible to use, safe, abrasion-resistant and bending-resistant. It's available inner diameters up to 1300mm, various lengths and pressure ranges.
Features:
Specification:
ID | Working Pressure (Mpa) |
Burst Pressure (Mpa) |
Length (m) |
Pipe Wall Thickness (mm) | |
mm | T (mm) | ||||
300 | ±2 | 0.4-1.2 | 3.6 | 1-3 | 34-37 |
414 | ±2 | 0.4-1.2 | 3.6 | 1-3 | 35-37 |
560 | ±3 | 0.4-1.2 | 3.6 | 2-3 | 40-45 |
600 | ±3 | 0.4-1.2 | 3.6 | 2-3 | 40-45 |
700 | ±3 | 0.8-1.5 | 4.5 | 2-3 | 40-45 |
800 | ±4 | 1.2-2.5 | 5.5 | 2-3 | 50-52 |
900 | ±4 | 1.5-2.5 | 7.5 | 2-3 | 55-58 |
1000 | ±5 | 2.0-2.5 | 7.5 | 3-5 | 75 |
I/D=Inner Diameter
L=Length
T=Tolerance
1.The steel flange discharge hoses are used with dredgers for silt/gravels conveyance.
2.The hose is often located in two steel pipes.
3.The suitable conveyance matters are usually mud, clay, fine sand, fine-mid sand and so on.
4.The suitable working temperature is from -20°C to +50°C.
5.Thickness if the pipe wall is from 15mm to 100mm.
Product Categories : Dredging Hose > Discharge Hose