Unit Price: | 800~1500 USD |
---|---|
Min. Order: | 1 Piece/Pieces |
Discharge Hose For Dredging
Specification:
ID | Working Pressure (Mpa) |
Burst Pressure (Mpa) |
Length (m) |
Pipe Wall Thickness (mm) | |
mm | T (mm) | ||||
300 | ±2 | 0.4-1.2 | 3.6 | 1-3 | 34-37 |
414 | ±2 | 0.4-1.2 | 3.6 | 1-3 | 35-37 |
560 | ±3 | 0.4-1.2 | 3.6 | 2-3 | 40-45 |
600 | ±3 | 0.4-1.2 | 3.6 | 2-3 | 40-45 |
700 | ±3 | 0.8-1.5 | 4.5 | 2-3 | 40-45 |
800 | ±4 | 1.2-2.5 | 5.5 | 2-3 | 50-52 |
900 | ±4 | 1.5-2.5 | 7.5 | 2-3 | 55-58 |
1000 | ±5 | 2.0-2.5 | 7.5 | 3-5 | 75 |
I/D=Inner Diameter
L=Length
T=Tolerance
1.The steel Flange discharge hoses are used with dredgers for silt/gravels conveyance.
2.The hose is often located in two steel pipes.
3.The suitable conveyance matters are usually mud, clay, fine sand, fine-mid sand and so on.
4.The suitable working temperature is from -20°C to +50°C.
5.Thickness if the pipe wall is from 15mm to 100mm.
Features:
1.convenient to install
2.flexible to use and safe
3.abrasion-resistant and bending –resistant
4.excellent prevent ageing performance
Product Categories : Dredging Hose > Discharge Hose